초록 열기/닫기 버튼

전기화학적 미소수정진동자저울은 전극표면에서 발생하는 나노그램 수준의 질량변화를 실시간 측정할 수 있는 장비이다. 역압전효과를 가진 수정진동자 양면에 형성된 금속전극에 교대로 전계를 가하면 진동자의 두께에 따라 특정 공진주파수를 나타낸다. 공진주파수는 전극표면에서 발생하는 질량변화에 반응하며, 전극표면의 금속이 용해될 때는 증가하고 석출될 때는 반대로 감소한다. 공진주파수와질량변화의 상관관계는 Sauerbrey 식으로 나타내고 이를 이용하여 금속의 침출반응때 발생하는 질량변화를 실시간으로 측정할 수 있다. 특히 용해 후 침출액에서 침전, 휘발, 기타 화합물 형성 등 부반응으로 실험 후 발광분광분석이나 원자흡광분석 등이 용이하지 않은 금속의 침출 반응기구 및 속도 연구에 매우 효과적이다. 그러나 수정진동자의 공진주파수는 질량변화 외에도 용액의 점도, 수압, 온도, 스트레스, 그리고 표면거칠기 등에도 영향을 받으므로 실험 시 이들 영향에 대한 고려가 필요하다. 전기화학적 미소수정진동자저울의 응용 예로서 염소를 이용한 백금의 침출 시 용해속도를 실시간 측정하고 이로부터 활성화에너지를 구하는 일련의 과정을 소개하였다. 침출에 사용된 백금시료는 수정진동자 양면에 형성된 1000 Å두께의 백금전극 중 침출액에 노출된 한쪽 면을 활용하였으며, 전해생성된 염소를 염산침출액에 주입하여 침출 시 용존 염소농도를 조절하였다. 실험결과로부터 염소에 의한 백금의 용해반응은 활성화에너지가 83.5 kJ/mol 로 화학반응율속임을 확인하였다.


Electrochemical Quartz Crystal microbalance is a tool that is capable of measuring nanogram-scale mass change on electrode surface. When applying alternating voltage to the quartz crystal with metal electrode formed on both sides, a resonant frequency by inverse piezoelectric effect depends on its thickness. The resonant frequency changes sensitively by mass change on its electrode surface; frequency increase with metal dissolution and decrease with metal deposition on the electrode surface. The relationship between resonant frequency and mass change is shown by Sauerbrey equation so that the mass change during metal dissolution can be measured in real time. Especially, it is effective in the case of reaction mechanism and rate studies accompanied by precipitation, volatilization, compound formation, etc. resulting in difficulties on ex-situ AA or ICP analysis. However, it should be carefully considered during EQCM experiments that temperature, viscosity, and hydraulic pressure of solution, and stress and surface roughness can affect on the resonant frequency. Application of EQCM was shown as a case study on leaching of platinum using aqueous chlorine for obtaining activation energy. A platinum electrode of quartz crystal oscillator with 1000 Å thickness exposed to solution was used as leaching sample. Electrogenerated chlorine as oxidant was purged and its concentration was controlled in hydrochloric acid solution. From the experimental results, platinum dissolution by chlorine is chemical reaction control with activation energy of 83.5 kJ/mol.