초록 열기/닫기 버튼
The purpose of this study was to develop an optimized hull-form of a coastal fishing vessel operating at high speed. In order to achieve the purpose of the study, HOTBOAT, that can perform an automatic hull-form optimal design of a coastal fishing vessel, was developed. HOTBOAT was composed of an objective function estimation algorithm and an optimization algorithm and a hull-form modification algorithm. In this study, the wave-making resistance was selected as an objective function and the potential-based panel method was applied to predict the objective function. SQP(sequential quadratic programming) method were adopted to predict the optimal direction and answer. Bell-shaped hull-form modification function method and NURBS(non-uniform rational B-spline) geometry modeling method were applied to modify the hull-form during the whole optimization process. HOTBOAT was applied to develop the optimal hull-form of a coastal fishing vessel with minimum wave resistance. The initial hull-form of the coastal fishing vessel was compared with the optimal hull-form. As a result of hull-form optimization, a coastal fishing vessel with a reduction of about 30% was developed compared with the initial hull-form and the displacement and the wetted surface area of the optimal hull-form was decreased to less than about 1% in comparison with the initial hull-form.
키워드열기/닫기 버튼
Coastal fishing vessel, Hull-form optimal design automation, Hull- form automatic modification algorithm, Optimization algorithm, Computational fluid dynamics, Wave-resistance performance prediction
